Baby auto RÜCKKO plus Guide D'utilisation page 28

4. INSTALLING THE ISOFIX BASE
1. Place the isofix base in the car seat. Hold the base with both hands and insert the
two Isofix arms
fasten with a click on both sides. The red button
sides (fig. 4 .1).
2. Shake the isofix base to check is properly anchored.
3. Push the Isofix base against the car seat to check that the Isofix system is fully
latched, ensuring that the child seat is as close to the car seat as possible (fig. 4.2).
4. Press the support leg adjuster button
makes full and firm contact with the floor pan of your vehicle (fig. 4.4). Green
indicator will appear, showing that the base has been correctly installed (fig. 4.5).
5. INSTALLING THE CHILD SEAT REARWARD FACING. GROUP 0 AND 1
NOTIFICATION
1. Line up the green points of the seat with the green points of the isofix base and
install the seat on the anchoring points
(fig.5.1 and 5.3).
2. Make sure that the seat is in recline position 4. If not, pull the recline lever to adjust
the seat until it is in this position (fig. 5.2).
3. Press the red button "press"
push the button "push" outward to close and lock the anchoring points. The red
"press" button will remain protruding, displaying the green "lock" indicator, which
indicates that the anchoring points are securely fastened (fig. 5.4).
4. Shake the seat to check that it is properly
6. FASTENING THE CHILD INTO THE SEAT. GROUP 0 AND 1
The correct adjustment of the headrest ensures that the child is properly fastened
into the car seat. The headrest must be adjusted so that the harness (which moves
28
(O)
firmly into the vehicle´s Isofix anchoring points
(V)
(P)
(R) (fig. 4.3) and extend the leg until it
Only for use with Group 0 and 1. From
approx. 0 to 4 years of age (0-18 kg)
(W)
facing away from the direction of travel
situated on the front of the base, which will
anchored.
(X)
will change to green on both
until they