Samoa 160 000 Guide D'utilisation

GB
• Safety instructions
Failure to follow all instructions listed below may result in electric
shock, fire and/or serious injury. Please read carefully.
• Work area
1. Keep your area clean and well lit. Cluttered benches and dull
areas may cause accidents.
2. Do not operate power tools in explosive atmospheres such
as in the presence of flammable liquids, gases or dust. Power
tolls create sparks that may ignite the materials.
3. Keep bystanders, children and visitors away while operating
a power tool. Distractions can lead you to lose control.
• Electrical safety
1. Avoid body contact with grounded surfaces such as pipes,
couplers. There is an increased risk o electric shock if your
body is grounded.
2. Do not expose power tools to rain or wet conditions. Water
entering a power tool will increase the risk of electric shock.
• Personal safety
1. Stay alert. Watch what you are doing, and use common
sense when operating a power tool. Do not use a power tool
while tired or under the influence of drugs, alcohol or
medication. A moment of inattention while operating power
tools may result in serious personal injury.
2. Dress properly. Do not wear loose clothing o jewelry or long
hair can be caught in moving parts.
Samoa Industrial, S.A. · Box 103 Alto Pumarín · 33211 Gijón - Asturias Spain · Tel.: +34 985 381 488 · Fax.: + 34 985 384 163
18 V HEAVY DUTY GREASE GUN
PISTOLA DE ENGRASE ELECTROPORTÁTIL
PISTOLET DE GRAISSAGE ÉLECTRIQUE À BATTERIE
Parts and technical service guide
Guía de servicio técnico y recambios
Guide d'utilisation
Warning / Atención / Attention
WARNING
Part No./ Cód./ Rèf.:
160 000 / 160 001
3. Avoid accidental starting. Be sure the Switch is released
before plugging in. Carrying power tools with your finger on
the Trigger, or plugging in power tools with the Trigger
depressed, invites accidents.
4. Remove adjusting keys or wrenches before turning the
power tool on. A wrench or a key that is left attached to a
rotating part of the power tools may result in personal injury.
5. Do not overreach. Keep proper footing and balance at all
times. Proper footing and balance enables better control of
the power tool in unexpected situations.
6. Use safety equipment. Always war ANSI approved safety
glasses underneath a full face safety shield. Dust mask,
nonskid safety shoes, hard hat or hearing protection must
used for appropriate conditions.
Do not use battery charger in damp or wet locations. Do not use
the Grease Gun or Charger if it has been dropped, damaged, left
outdoors or immersed in liquid. To avoid electrical shock, do not
handle the charger, its power cord plug or the Grease Gun with
wet hands.
You should never interchange battery packs and/or battery
chargers amongst the Ni-MH (160 000) and the Li-ION versión
(160 001).
Grease gun can develope high pressure - up to 8.000 psi. Use
safety glasses and gloves for protection during operation. Keep
hands clear of the exposed rubber portion of Hose.
1
R. 05/12 816 803