Connecting The Videophone - Extel WEVP 630 E BIS Mode D'emploi Et D'installation

3. CONNECTION OF THE VIDEOPHONE
a. Connecting the videophone
In order to avoid parasites and malfunctions, do not pass your videophone cable in the same
sheath as the electric cables.
1. Connect up the components as shown in the wiring diagram
2. Only six wires are needed for all the functions : ringer, image, sound and door-open.
Pay attention to the numbers of the wires between the monitor and outdoor station (the polarity
of the door-open function wires does not matter).
Distance between Installation
outdoor station
and monitor
1 - 25 meters No door-open function
With an electric catch
or lock
With a gate mecha-
nism
Up to 100 meters No door-open function
With an electric catch
or lock
With a gate mecha-
nism
Connection of the monitor to the outdoor station:
• Monitor terminal "1"
• Monitor terminal "2"
• Monitor terminal "3"
• Monitor terminal "4"
NB: never double wires up to increase their cross-section
IMPORTANT !
If you want to try your videophone before installing it, do not set the monitor and the
outdoor station up in the same room or it will emit an unpleasant, shrill sound.
Type of cable to be used Comments
4 x 6/10° wires
6 x 6/10° wires
6 fils de 6/10°
4 x 1.5 mm
6 x 1.5 mm
6 x 1.5 mm
to outdoor station terminal
to outdoor station terminal
to outdoor station terminal
to outdoor station terminal
4EN
Include a 12 V trans-
former (at least 13 VA)
Connect the mechanism
to terminals 5 and 6 on
the back of the monitor
wires
2
wires Include a 12 V trans-
2
former (at least 13 VA)
wires Connect the mechanism
2
to terminals 5 and 6 on
the back of the monitor
"1"
"2"
"3"
"4"