Switching On/Off; Clock Adjustment; Source Selection; Audio Controls - Trevi SCD 5751 DAB Mode D'emploi

ENGLISH
DESCRIPTION OF UNITS COMMANDS
1. I << button, tuning, previous track.
2. Volume control / SEL button, Volume and tone control / user options access.
3. SD card input.
4 Display.
5. USB input.
6. POWER button, on / off.
7. MODE key, FM / DAB / SD / USB / AUX / BT RADIO mode, closing the telephone conversation.
8. BAND key, selection of frequency band F1, F2, F3 / scanning and storing radio frequencies (FM and DAB) / selecting
SEARCH TRACK in MP3 player mode / acept telephone conversation.
9. >> I button, tuning, next track.
10. 1 / PAU button, start / pause / restore playback.
11. 2 / INT key, playback of the first 10 seconds of a song.
12. 3 / RPT button, track repeat function.
13. 4 / RDM button, random play.
14. 5 / -10 button, jump to the previous tenth track.
15. 6 / + 10 button, jump to the tenth next track.
16. Radio station buttons stored from 1 to 6.
17. AUX input.
18. MUTE button, audio muting.
19. CLK button, shows / sets the clock.
SWITCHING ON / OFF
1. Press the POWER button (6) to switch on the appliance.
2. Press the POWER button (6) to switch off the appliance.
NOTE: in the event of general malfunctions, to return to correct operation, switch off the radio for a few seconds and switch it on
again using the POWER button (6).

CLOCK ADJUSTMENT

1. Press the POWER button (6) to switch on the appliance.
2. Long press the CLK button (19) until the display shows the flashing hour.
3. Turn the Volume control (2) clockwise / counterclockwise to adjust the current time. Press the Volume control (2) to
confirm.
4. Turn the Volume control (2) clockwise / counterclockwise to adjust the current minutes. Press the CLK button (19)
to confirm.

SOURCE SELECTION

Press the MODE key (7) in sequence to select the RADIO sources FM, DAB, SD, USB, AUX, BT (the SD / USB sources are
displayed only if a memory device is present).

AUDIO CONTROLS

VOLUME ADJUSTMENT
Turn the Volume control (2) clockwise / counterclockwise to increase / decrease the volume.
ADJUSTING button / volume / LOW / HIGH TONE lighting
1. Press the SEL key (2) once to select the key illumination color (Auto = variable color).
2. Press the SEL button (2) twice to select the volume adjustment.
3. Press the SEL button (2) three times to select the low tone adjustment, the indication of the "BAS" low tone level
appears on the display. Turn the Volume control (2) clockwise / counterclockwise to increase / decrease the bass level.
4. Press the SEL button (2) four times to select the treble adjustment, the indication of the "TRE" treble level appears
on the display. Turn the Volume control (2) clockwise / counterclockwise to increase / decrease the level of high tones.
BALANCE / FADER CONTROL
1. Press the SEL button (2) five times to select the channel balance.
2. "BAL" appears on the display.
3. Turn the Volume Control (2) clockwise / counterclockwise to balance the sound on the right / left channel
4. Press the SEL (2) button six times to select the fader setting.
10
SCD 5751 DAB