Switching On/Off; Clock Adjustment; Source Selection; Audio Controls - Trevi SCD 5702 BT Mode D'emploi

SCD 5702 BT
ENGLISH
DESCRIPTION OF UNIT COMMANDS
1. BAND button, selection of frequency band F1, F2, F3 / scan and radio frequencies storage / TRACK SEARCH selection
in MP3 player mode / telephone conversation opening.
2. MODE key, RADIO / USB / SD / AUX / BT mode, telephone conversation closure.
3. EQ button, selection of one of the preset audio dynamics.
4 Volume control / Selection key, Volume control and user options / tones.
5. CLK button, shows / sets the clock
6. POWER button, on / off.
7. USB input.
8. AUX input.
9. Key I <<, tuning, previous track.
10. Key >> I, tuning, next track.
11. MUTE button, immediate silence of the car radio.
12. Key 1 /PAU, memory 1 / playback / pause.
13. Microphone
14. Key 2 / INT, memory 2 / playback of the first 10 seconds of a song.
15. Key 3 / RPT, memory 3 / track repeat function.
16. 4 / RDM button, memory 4 / random playback
17. Key 5 / -10, memory 5 / jump to the tenth previous track.
18. Key 6 / + 10, memory 6 / jump to the tenth next song.
19. SD input.
SWITCHING ON / OFF
1. Press the POWER button (6) to switch on the appliance.
2. Press the POWER button (6) to switch off the appliance.
NOTE: in the event of general malfunctions, to return to correct operation, switch the car radio off for a few
seconds and switch it on again using the POWER button (6).

CLOCK ADJUSTMENT

1. Press the POWER button (6) to switch on the appliance.
2. Long press the CLK key (5) until the display shows the flashing time.
3. Turn the Volume Control (4) clockwise / anti-clockwise to adjust the current time. Press the CLK button (5) to confirm.
4. T urn the V olume Control (4) clockwise / anti-clockwise to adjust the current minutes. Long press the CLK key (5) to confirm.

SOURCE SELECTION

Press in sequence the MODE key (2) to select the RADIO, SD, USB, AUX, BT sources (SD / USB available only if a memory
device is present).

AUDIO CONTROLS

VOLUME ADJUSTMENT
Turn the volume control (4) clockwise / anti-clockwise to increase / decrease the volume.
Press the MUTE button (11) to immediately silence the car radio; press it again to resume listening.
ADJUSTMENT OF LOW / HIGH TONES
1. Press the selection button (4) once to select the bass adjustment.
2. The "BAS" bass level indication appears on the display.
3. Turn the Volume Control (4) clockwise / anti-clockwise to increase / decrease the bass level.
4. Press the selection key (4) twice to select the treble adjustment.
5. The "THREE" level indication appears on the display.
6. Turn the Volume Control (4) clockwise / anti-clockwise to increase / decrease the high tone level.
BALANCE / FADER CONTROL
1. Press the selection key (4) three times to select the channel balance.
2. "BAL" appears on the display.
3. Turn the Volume Control (4) clockwise / anti-clockwise to balance the audio on the right / left channel
4. Press the selection key (4) four times to select the fader setting.
9