Manual Tuning - Trevi SCD 5751 DAB Mode D'emploi

ENGLISH
5. "FAD" appears on the display.
6. Turn the Volume control (2) clockwise / counterclockwise to adjust the sound on the rear / front speakers.
ADDITIONAL SETTINGS
LOUDNESS
- Press the SEL button (2) seven times to activate / deactivate the LOUD function (bass enhancement).
DEFAULT EQUALIZER
- Press the SEL key (2) eight times to select the preferred preset equalization. It is possible to choose between CLASS,
ROCK, POP, FLAT, JAZZ, OFF (no equalization).
Note: by selecting a preset equalization it is not possible to adjust the high / low tone values.
DX / LOCAL (AVAILABLE IN RADIO MODE)
DX: during the automatic search for radio stations, all the stations will be received, even the disturbed ones. This option
is factory set.
LOCAL: during the automatic radio station search, only the stations with the strongest signal will be received.
STEREO / MONO (AVAILABLE IN RADIO MODE)
STEREO: set to listen to the radio in stereo.
MONO: set the radio to listen in mono.
SUB
Activates the SUB1 pre-amplified output for connecting an external subwoofer.
SUB 2
Activates the pre-amplified SUB2 output for connecting a second external subwoofer.
SUB LEVEL
Sets the audio level of the SUB1 and SUB2 outputs.
CUT
Sets the cutoff frequency of the SUB1 and SUB2 outputs.
FM RADIO
AUTOMATIC TUNING
1. Press the BAND button (8) to select the frequency band (FM1 / FM2 / FM3) you want to listen to.
2. Press the >> I (9) button to automatically tune in the next station.
3. Press the I << button (1) to automatically tune in to the previous station.

MANUAL TUNING

1. Press the BAND button (8) to select the frequency band (FM1 / FM2 / FM3) you want to listen to.
2. Long press the >> I (9) or I << (1) key until the display shows MANUAL, press the >> I (9) or I << (1) key to move
forward or downgrade the tuning to 0.05MHz in FM. Wait a few seconds to return to automatic tuning (AUTO appears
on the display).
STORAGE OF STATIONS
1. Tune in to the desired station as described above.
2. Press and hold a desired memory button 1 to 6 (16).
3. Repeat step 2 to store all other stations on all bands.
AUTOMATIC STORAGE OF STATIONS
This appliance is equipped with an auto memorization system that searches and memorizes the strongest stations.
1. Press and hold the BAND button (8). The device will automatically search for and store the stations with the strongest
signal.
11
SCD 5751 DAB