Structure; Warranty - TAIFUN Vireo Mode D'emploi

Taifun Vireo
Operation manual

STRUCTURE

This battery carrier is distinguished by its relatively simple handling
and excludes the usual disad-vantages of a mechanical button, which
usually occur in an uncontrolled mechanical battery carrier.
The relatively high on-resistance and the increased wearout of the
button at larger currents is eliminated in our device.
Through a patented new development of our magneto-optical button,
or „magneto", we have managed to develop a button that is not sub-
ject to wearout and is also immune to moisture.
The consistently low-resistance structure of the Vireo in conjunction
with an extremely low-resistance evaporator and a high performance
battery can cause EXTREMELY HIGH CURRENT peaks in or on the eva-
porator in case of a direct short circuit.
Please consider that the device might not be able to register these
current peaks. We measure within 0.002 seconds after switching on,
but nevertheless damaging our board can occur in RARE instances.
However, we have not been able to reproduce this extreme case with
the Vireo. But we do not know what future batteries will „afford".
Despite our monitoring of the overload and overtemperature of the
MOSFET, avoid direct short circuits!
If possible, use evaporators with widely spaced coil contacts (> 4 mm).
This minimizes short circuits and also ensures your safety. In evapora-
tors with closely spaced contacts (<= 1 mm) the risk of an accidental
short circuit is very high!

WARRANTY

We warrant this product for a period of twelve months from date of
purchase, but NOT for consequences caused by permanent fluid (liquid)
on the circuit board inside the battery carrier or ANY defects caused
by extremely excessive current peaks that exceed the permissible
© 2015 SmokerStore GmbH Page: 18