Panasonic ER-GB96 Manuel D'instructions page 15

3. Wipe off the water with a towel
and let it dry naturally.
It will dry faster with the blade
removed.
4. Apply the oil to the blade after
drying. (See this page.)
5. Attach the attachment and blade
to the appliance.
With the brush
1. Remove the attachment and blade.
2. Brush off any hair trimmings from
the main body and from around the
blade.
3. Brush any hair trimmings out from
between the stationary blade and
the moving blade while pressing
down the cleaning lever to raise the
moving blade.
4. Apply the oil to the blade. (See this page.)
5. Attach the attachment and blade to the appliance.
ER-GB96_86.indb 15
All manuals and user guides at all-guides.com
Lubrication
• Apply the oil to the blade before and after each use.
1
2
3
► Replacement parts
Replacement part is available at your dealer or Service Centre.
Replacement part for
ER-GB96/ER-GB86
• Do not use any blade other than the one dedicated as it may
cause defect in performance.
• We recommend Panasonic lubrication oil WES003P.
Remove the blade.
(See page 16.)
Apply a drop of the oil to
each indicated point.
Attach the blade to the main
body, turn on the power and
allow to run for approximately
5 seconds.
Blade
Lubrication oil WES003P
WER9620
15
17/12/13 下午2:31