Panasonic ER-GB96 Manuel D'instructions page 13

Detail trimming attachment
• The trimming height cannot be adjusted.
►How to use the detail trimming attachment
Slide the detail trimming
attachment to switch the position
of the blade to be exposed
depending on the location to cut.
►Trim the beard in tight sections or to detailed form
Move the blade along the skin to
trim.
ER-GB96_86.indb 13
All manuals and user guides at all-guides.com
Without the attachment
ER-GB96
(Trimming height: approx. 0.5 mm)
• The appliance cannot trim hair to lengths less than 0.5 mm.
►Trimming the downy hair
Holding the appliance with the
power switch facing outwards,
trim by bringing the blade in
contact with the skin.
►Design precise lines
1
2
► Above and below lips
Holding the appliance with the power switch at the
bottom, cut across a line with the blade at a 90°
angle to the skin.
Place the blade at a right angle
on the edge of where you want
to make a precise line.
Move the blade away and
down from the area you
want to leave, and cut the
remaining beard.
13
17/12/13 下午2:31