Troubleshooting; Maintenance And Care - Kenwood CR-M10DAB Notice D'emploi

Troubleshooting

In the event of malfunction please check the following points:
No sound
 Plug in the mains plug correctly.
 Set the volume to the correct level.
 Make sure that the desired source is selected.
The system does not react to button pressing
 Take out the main cable and reconnect it.
Radio reception problems
 Re-align the antenna.
 Look for a more suitable location.
 Other electrical devices disrupt the reception.
 The location is not suitable for reception of DAB+ signals.

Maintenance and care

Cleaning the housing: Use a cloth lightly moistened with a mild cleaning agent. Do not use any cleaning
agent which contains alcohol, ammonia or abrasives.
Cautions regarding condensation formation
Condensation (dew) can form in the interior of the device if there is a significant difference between the
temperature of the device and the ambient temperature. If condensation occurs in the interior of the device,
proper functioning can no longer be guaranteed. In this case, wait for a few hours; the device can be used
again after the moisture has dried out.
Special caution is advisable under the following circumstances
If the device is moved from one place to another where the temperature is significantly higher or lower or if
the atmospheric humidity increases at the device's location, etc.
15