Basic Functions; Volume Controls; Navigating The Menu; Setting The Menu Language - Kenwood CR-M10DAB Notice D'emploi

Basic functions

Switching on the radio: Press the
Switching off in standby: Press the
display and the device switches over to standby mode. The time will continue to be displayed.

Volume controls

Rotate the "VOL" control to increase or decrease the volume. The selected volume is displayed
graphically.
Navigating in the menu
To select a menu point or set numbers, use the <TUNE+-> buttons and confirm the selection using
the "VOL" control. Pressing the <MENU> button enables one to leave that particular menu. In some
instances, the values set are indicated with a "*" behind the menu label.

Setting the menu language

1. Switch the radio on and, using the <SOURCE> button, select the source FM.
2. Press the <MENU> button, then, using <TUNE+/->, select the "System" menu and then press
the "VOL" control.
3. Using the <TUNE+-> buttons, select the "Language" menu and then confirm.
4. Using the <TUNE+-> buttons, select the desired language and confirm using "VOL".

Setting the time

The time is set automatically if a DAB+ or FM station is received in sufficient quality. This process can
take some time, depending on the strength of reception. If no appropriate station is available, you
can also set the time manually.
1. Switch the radio on and, using the <SOURCE> button, select the source FM.
2. Press the <MENU> button, then, using <TUNE+/->, select the "System" menu and then press
the "VOL" control.
3. Using the <TUNE+-> buttons, select the "Time" menu and then confirm.
4. Select "Set time/date" and confirm. Then select and confirm hours, minutes, day, month
and year.
Other settings in the "Time" menu
The following functions can be set in the "Time" menu:
"Auto update": Setting from which source the time is automatically retrieved.
Options: "Update all" / "Update DAB" /"Update FM" /"No update"
"Set 12/24 hour clock": Setting the time format.
Options: "Set 24 hr clock" / Set 12 hr clock"
Set date format": Setting the date format.
Options: DD-MM-YYYY" / "MM-DD-YYYY"
8
button on the radio
button on the radio. 'Standby' will appear briefly on the