Mounting The Bike Handle - Stihl FS 260 C Notice D'emploi

Approved Combinations
Select correct combination from the
table according to the cutting
attachment you intend to use.
For safety reasons only the cutting
attachment and deflectors or limit stops
shown in each row of the table may be
used together. No other combinations
are permitted because of the risk of
accidents.
Cutting Attachments
Mowing heads
1 STIHL SuperCut 40 - 2
2 STIHL AutoCut 40-2
3 STIHL TrimCut 41-2
4 STIHL PolyCut 41-3
Metal cutting attachments
5 Grass cutting blade 230-4
6 Grass cutting blade 255-8
7 Grass cutting blade 250-40 Spezial
8 Brush knife 305-2 Spezial
9 Brush knife 300-3
10 Shredder blade 270-2
11 Scratcher tooth circular saw blade
200
12 Chisel tooth circular saw blade 200
13 Scratcher tooth circular saw blade
225
14 Chisel tooth circular saw blade 225
15 Carbide tipped circular saw blade
225
FS 260 C, FS 360 C
Non-metal grass cutting blades, brush
knives, shredder blades and circular
saw blades are not approved.
Deflectors, limit stops
Deflectors
16 Deflectoronly for mowing heads
17 Deflector for mowing attachments,
items 5 to 9
18 Deflector for shredder blade
Limit stops
19 Limit stop for circular saw blades
200
20 Limit stop for circular saw blades
225
Harnesses
21 Full harness must be used

Mounting the Bike Handle

Mounting the bike handle with swiveling
handle support
2
1
The machine is supplied with the clamp
moldings (1) mounted to the
handlebar (2).
Mounting the control handle
Take out the screw (3) and remove
N
the nut (4) from the control
handle (5).
English
3
5
4
13