Snooze Function; Sleep Function; Radio Operation - Electrohome SelfSet EAAC600 Guide De L'utilisateur

SNOOZE FUNCTION

1.
When alarm is activated, press the SNOOZE (3) to enable snooze function, Buzzer
alarm or Radio alarm will stop.
2. Snooze interval is 9 minute (not including one second offset).
3. Snooze will continue unless the ON/OFF (4) is pressed. Buzzer alarm or Radio
alarm will stop automatically after 30 minutes.
4. Select the display AUTO OFF / LOW / HIGH dimmer (20) to the AUTO OFF
mode, when alarm sounds the display will automatically turn on.
CHANGING THE DISPLAY CONTENT
1. Pressing the << / MONTH-DAY / °C/°F(17) can switch the display to show the
month and day, after 5 seconds the display will timeout and return to display
the time.
2. Pressing the >> / YEAR / DST(18) can switch the display to show the year, after 5
seconds display will timeout and return back to display the time.
3. Press and hold the << / MONTH-DAY / °C/°F (17) for 3 seconds to change
temperature unit °C/°F.

SLEEP FUNCTION

1. While radio is on, press SNOOZE/SLEEP (3) to turn on Sleep mode, the
sleep time will keep flashing for 5 seconds, while flashing press SLEEP to
change the duration from 90 min – 15 min. Press ON/OFF (4) to cancel
sleep function.
2. When radio is off, set the display Auto OFF / LOW / HIGH dimmer (20) to the Auto
OFF mode, the LCD display light will automatically turn off in 15 seconds. Press
any key to turn the display light on.

RADIO OPERATION

1. Press the ON/OFF (4) to turn radio on.
2. Select AM/FM band BY pressing the AM/FM band(2).
3. Select the station using the TUNING DIAL (23).
4. Turn the volume DIAL (22) to adjust volume as required.
5. Press the ON/OFF (4) to turn radio off.
Note:
• The AM band uses an internal directional aerial, rotate the radio for best reception.
• Ensure that the FM antenna (14) is completely unrolled and extended for best
FM reception.
PROJECTION
1. Focus setting: Adjust the projection clock brightness/focus by turning the
brightness/focus adjustment wheel (10) until the projected time is clearly shown
on the ceiling or wall.
2. To flip projected image by 180°, press 180° flip (11).
NOTE: PROJECTS TIME IMAGE ON THE CEILING OR WALL OF A DARKENED ROOM.
MAXIMUN PROJECTION DSTANCE IS 3-9 FEET.
OPERATING INSTRUCTIONS
- 10 -