Replacing The Light Bulb; Transportation And Changing Of Installation Position; Before Calling Your After Sales Service - Burg BKG122DT A+ Guide D'utilisation

Replacing the Light bulb

When replacing the bulb of the refrigerator compartment;
1. Unplug the unit from the power supply,
2. Press the hooks on the sides of the light cover top and remove the light cover
3. Change the present light bulb with a new one of not more than 15 W.
4. Replace the light cover and after waiting 5 minutes plug the unit.
Replacing LED lighting
If your refrigerator has LED lighting contact the help desk as this should be changed by
authorized personnel only.
TRANSPORTATION AND CHANGING OF
PART 5.
INSTALLATION POSITION

Transportation and Changing of Installation Position

• The original packages and foamed polystyrene (PS) can be retained if required.
• During transportation, the appliance should be secured with a wide string or a strong
rope. The instructions written on the corrugated box must be followed while transporting.
• Before transporting
installation position, all the moving objects
(ie,shelves,crisper...) should be taken out
or fixed with bands in order to prevent them
from getting damaged.
• Carry your fridge in the upright position.
PART 6.

BEFORE CALLING YOUR AFTER SALES SERVICE

If your refrigerator is not working properly, it may be a minor problem, therefore check the
following.
The appliance does not operate,
Check if:
• There is a power failure,
• The mains plug is not plugged in properly, or is loose
• The thermostat setting is on position " ",
or changing the
EN -28-