Ducting Preparation - Zephyr Monsoon Mini II AK9528AS Guide D'utilisation, D'entretien Et D'installation

Installation Instructions

Ducting Preparation

If vertically ducting hood with 7" round collar or if using hood in recirculating mode, skip these steps
and turn to the next page.
Vertical Ducting
(3-1/4"x10"
Rectangular)
Horizontal Ducting
(3-1/4" x 10"
Rectangular)
16
1. Remove 7" round transition
collar on top of hood by (6) M4 x 6
screws.
1. Remove 7" round transition collar
on top of hood by (6) M4 x 6 screws
and secure rectangular top cover
plate to top of the hood.
3. Secure 3-1/4" x 10" rectangular
collar to back of hood using (6) M4
x 6 screws.
Monsoon Mini II Use, Care, and Installation Guide
M O N S O O N M I N I I I
2. Secure 3-1/4" x 10" rectangular
collar to top of hood using (6) M4 x
6 screws.
2. Using a flat-head screwdriver,
remove the rectangular knock-out
plate located on back of hood.
C O R E
I N S E R T