Cleaning And Maintenance / Accessories - KRUG+PRIESTER IDEAL AP60 PRO Mode D'emploi

Cleaning and maintenance / Accessories

Cleaning and maintenance
CAUTION: Disconnect the mains plug prior to any cleaning or maintenance work!
• R eplace the filter cartridge as soon as the filter replacement indicator (F, page 34) lights up.
The average life expectancy of the filter is approx. 1 year (depending on operation and
purification activities).
• C lean the air purifier housing with a lint-free cloth moistened with soapy water.
• Clean the control panel with a dry, lint-free cloth.
• Clean the openings for the air quality sensor (L) and the dust sensor (M page 32) with a
vacuum cleaner.
• C lean the air intake ducts (page 31) and the interior of the air purifier with a vacuum cleaner.
• C lean the filter cartridge's pre-filter with a vacuum cleaner. To do this, remove the filter
cartridge ("Changing the filter" page 38).
• Do not use any solvents. These could damage the housing surface, the control panel and the
air quality sensor.
• Protect the air purifier from water.
• Do not use any substances containing silicone, since this could destroy the air quality sensor.
• Do not test the effectiveness of the air quality sensor with high quantities of gas, or alcohol,
since this could destroy the air quality sensor.
Accessories
You can source accessories via your dealer or at www.ideal.de.
40
IDEAL filter cartridge
Wall mount
Trolley
Order no. 8741 100
Order no. 8741 001
Order no. 8741 002