KRUG+PRIESTER IDEAL AP60 PRO Mode D'emploi page 30

Unpacking and setting up
9.
7.
10.
8.
13.
14.
14. 13.
30
11.
9.
12.
10.
13.
15.
14.
16.
Hold the filter cartridge with both hands
using the recessed grips provided and turn it
anti-clockwise (9.).
Take out the filter cartridge (10.) and remove
the protective film (11.).
Insert the filter cartridge with the three tabs in
the notches provided and lock in position by
turning clockwise
Hook in the front panel at the bottom first (13.),
then pivot upwards and press shut (14.).
Connect the power cable to the device first
(15.), then to the socket (16.).
Note:
Use the original packaging to store the air
purifier if you are not using it all year round.
Pack and store the filter cartridge airtight to
protect the activated carbon.
Safety information
Operating the air purifier without panels and
protective covers (motor protection grille,
ventilation outlet grille, door, etc.) fully and
securely attached is not permitted.
(12.).