Go Preset; Autopan - Security-Center EcoLine TV7090 Instructions D'installation

GO PRESET

GO PRESET
The
call a preset position follow the steps given below:
1. Step: Choose a speed dome camera in which you want to programm a preset position, e.g. camera 1:
0 0 1 ENTER
Key in:
The keyboards LCD displays:
2. Step: Key in the desired preset position number, e.g. number 1
0 0 1 GO PRESET
Key in:
The keyboards LCD displays:
The speed dome camera will automatically be directed to the selected position
NOTE: To change the current position you can either:
a) select a different preset position as explained above
b) select a different position using the joystick
AUTO PAN
The auto pan mode enables the user to group 32 prior programmed preset positions in up to 4 groups.
Once activated the auto pan function, the dome recalls automatically the preprogrammed preset positions.
Use the OSD of the keyboard to arrange preset position into auto pan groups.
NOTE: By factory default the speed dome offers 2 additional groups which settings cannot be changed
group 5 – continuous panning within preset positions 1,2 and 3.
group 6 – continuous panning within preset positions 4,5 and 6.
To activate an auto pan group please proceed as follows:
1. Step: Choose a speed dome camera in which you want to programm an auto pan group, e.g. camera 1:
0 0 1 ENTER
Key in:
The keyboard's LCD displays:
2. Step: Key in the desired auto pan group, e.g. number 1
0 0 1 AUTO PAN
Key in:
The keyboard's LCD displays:
AUTO PAN
The
button is used to direct the speed dome camera to a prior stored preset position. To
⎡
DEVICE
⎢
⎣
⎡
DEVICE
⎢
⎣
⎡
DEVICE
⎢
⎣
⎡
⎢

AUTOPAN

⎣
LED is lid.
⎤
001 _ :
⎥
⎦
⎤
001 _ :
⎥
⎦
⎤
001 _ :
⎥
⎦
DEVICE 001 :
GROUP 1 :
15
⎤
⎥
⎦