Maintenance; Troubleshooting - Silk-n JEWEL LUXX Instructions D'utilisation

11. Maintenance

It is important to clean your Silk'n Jewel device after each treatment. To clean
the device:
L
Unplug the device.
L
Use a dry, clean cloth and a specially formulated cleaning
detergent for electronic equipment to gently wipe the surface,
including the treatment surface.
L
After cleaning, we recommend you store the device in its original
box.
E
Never immerse your Silk'n Jewel or any of its parts in water.

12. Troubleshooting

Do not attempt to open or repair your Silk'n Jewel. You may exposure
yourself to dangerous electrical components or pulsed light energy.
You may cause serious harm to yourself and you will void your warranty.
Problem
My Silk'n Jewel does
not start.
There is no light pulse
when the device
touches my skin.
The skin colour sensor
light and the ready light
blink.
One or more lights
blink.
For problems or queries, please contact Silk'n™ Customer Service.
Checks
Make sure the adapter is properly connected to the
device and that it is plugged into an electrical outlet
on the wall.
Check that the device is connected and the ready
light is on. Make sure that the treatment surface is
evenly and firmly pressed to the skin.
It is also possible that your skin colour is too dark.
The skin colour is too dark.
The device has malfunctioned.
15
EN