SOLAC PP7252 Mode D'emploi page 11

PP7252.book Page 11 Thursday, July 30, 2009 2:01 PM
Safety auto-off system
• For safety reasons the straighteners will switch themselves off after 20
minutes if not touched.
4 Use
)
This appliance has been designed to wave, curl, curl ends in and out,
add body and straighten hair.
n
While operating, the plates may reach temperatures of up to 210ºC. The
plastic parts near the ceramic plates may also be hot. Do not allow the
hot parts to come close to the skin to avoid possible burns.
n
Under no circumstances should you use flammable substances (gel,
etc.) on your hair before using the straighteners.
)
Do not use the straightener on wet hair.
Recommended temperatures
Operation
1 Place the straightener on a flat, heat-resistant surface.
2 Plug it in.
3 Press the "On" button (1), and the white "minimum temperature" icon
(180º C) will turn on, showing that the straightener is operating, (Fig. 1).
4 Select the ideal temperature for your type of hair by pressing the
temperature selector (3) (Fig. 2). The temperature selector starts at the
coolest temperature gradually moving up to the maximum setting.
,
While heating, the icon of the selected position will flash.
,
When the selected temperature has been reached, the icon will stay on
permanently (Fig. 3).
)
The straightener will maintain the preselected temperature constant.
To straighten (Fig. 4)
1 Take a lock of hair (approximately 4 cm wide) and place it between the
plates. Close them and slide the straightener down the lock of hair from
the roots to the tips.
2 Repeat this operation until all your hair is completely straight.
)
For best results, we recommend you begin with the lower layers of hair
and continue with the top layers.
Use
H
AIR TEXTURE AND CONDITION
Very curly, strong hair, for a quick, profes-
sional result
Curly and/or thick hair
Wavy hair, normal texture
Fine, porous, dyed, bleached or high-
lighted hair
en
T
EMPERATURE
210 ºC
200 ºC
190 ºC
180 ºC
11