Varan XM-1010 Manuel D'utilisation page 18

UNPACKING
Carefully remove the tool and all loose items from the shipping container.
Retain all packing materials until after you have inspected and satisfactorily operated the machine.
Carton Contents
1.Long-reach grinder machine
2.Vacuum cleaner hose
3.Instruction manual
4.Bail handle
5.Face spanner wrench
6.Hex wrench
7.125mm Diamond cup wheel
DO NOT OPERATE THIS TOOL UNTIL YOU READ AND UNDERSTAND THE ENTIRE INSTRUCTION MANUAL.
To install a diamond cup wheel:
1.Unplug the machine.
2.Place the Diamond Cup Wheel on the arbor and thread on the Arvor Nut.
3.Using the Face Spanner Wrench to keep the Diamond Cup Wheel from turning,tighten the Arbor Nut with
the Wrench.
4.Remove is the opposite of assembly.
To install the vacuum cleaner hose:
1.Unplug the machine.
2.Plug the vacuum cleaner hose bayonet connector into the swivel connector in the back of the
machine.Once the tangs of the bayonet connector ar fully inserted in the slots, hold the swivel connector
from turning and turn the hose bayonet connector clockwise to lock.
3.Removal is the opposite of assembly.
The vacuum cleaner:
Ensure that you have a bag installed in your vacuum cleaner which is approved and rated for fine dust
WARNING:Failure to use an approved dust bag in your vacuum will increase the level of airborne dust in
the work area.Prolonged exposure to such dust may cause respiratory harm.
Varan motors
BCIE SARL, gruuss-strooss 28, 9991 Weiswampach, Luxembourg
XM-1010
T: 00352/26908036 – F: 00352/26908040