Varan XM-1010 Manuel D'utilisation page 17

A damaged cable must be replaced immediately by an authorized Customer Service Center.Do not try to
repair the damaged cable yourself.The use of damaged power cables can lead to an electric shock.
Extension cable
If an extension cable is required, it must have a sufficient cross-section so as to prevent an excessive drop in
voltage or overheating. An excessive drop in voltage reduces the output and can lead to failure of the
motor.The following table shows you the correct cable diameter as a function of the cable length for this
machine. Use only approved extension cables. Never use two extension cables together.Instead, use one long
one.
DESCRIPTION
Varan motors
BCIE SARL, gruuss-strooss 28, 9991 Weiswampach, Luxembourg
Total Extension Cord Length(feet)
25
50
100
150
200
Cord Size(AWG)
16
12
10
8
6
T: 00352/26908036 – F: 00352/26908040
XM-1010