Romus MH-630 Manuel D'utilisation page 9

SAFETY RULES FOR THE FLOORING CUTTER
1.READ AND UNDERSTAND THIS INSTRUCTION MANUAL BEFORE OPERATING THE ROMUS
MULTI-FLOORING CUTTERS.
2.If you are not thoroughly familiar with the operation of Multi-flooring Cutter, obtain advice from a
qualified instructor
3.Stay alert. Do not operate while under the influence of drugs, alcohol, or medication.
4.Always wear safety approved eye protection with side shields(ANSI Z87.1)
5.Keep work area free of debris.
6.Keep children and unauthorized persons away from the Multi-flooring Cutter and work area.
7.Make sure tool is secure. Operate only on a firm substrate or solid stand.
8.Use the right tool. Do not force the Multi-flooring Cutter or use it for a job for which it was not
designed; use only on approved materials.
9.Keep the blade sharp. A dull blade will not perform properly.
10Always keep hands away from blade while operating or carrying the cutter.
11.Do not alter or misuse this tool. The Multi-flooring Cutter is precision built; modifications not
specified in this manual may result in a dangerous and unsafe environment.
12.Maintain the Multi-flooring Cutter with care. Keep Blade sharp and clean. Follow instructions for
changing accessories.
13.Use only recommended accessories. The use of improper accessories may be hazardous and
cause injuries.
14.Never leave the Multi-flooring Cutter unattended. Secure the handle with the lock chain when not in
use.