Important Safety Information
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
WARNING for using R32 refrigerant
•
Do not use means to accelerate the defrosting process or to clean other than those recommended by the
manufacturer.
•
The appliance shall be stored in a room without continuously operating ignition sources for example, open
flames, an operating gas appliance or an operating electric heater.
•
Do not pierce or burn.
•
Be aware that the refrigerants may not contain an odor.
•
The appliance should be installed, operated and stored in a room with a floor area according to the amount of
refrigerant to be charged. For specific information on the type of gas and the amount, please refer to the relevant
label on the unit itself. When there are differences between the label and the manual on the minimum room area
description, the description on the label shall prevail.
•
Appliance shall be installed, operated and stored in a room with a floor area larger than 4m (13.13 inches).
•
Appliance shall not be installed in an unventilated space if that space is smaller than 4m (13.13 inches).
•
Compliance with national gas regulations shall be observed.
•
Keep ventilation openings clear of obstruction.
•
The appliance shall be stored so as to prevent mechanical damage from occurring.
•
A warning that the appliance shall be stored in a well-ventilated area where the room size corresponds to the
room area as specified for operation.
•
Any person involved with working on the refrigerant circuit should hold a current, valid certificate from an
industry accredited assessment authority which authorizes their competence to handle refrigerants safely in
accordance with an industry recognized assessment specification. All training shall follow the ANNEX HH
requirements of UL60335-2-40. Examples for such working procedures are:
•
breaking into the refrigerating circuit;
•
opening of sealed components;
•
opening of ventilated enclosures.
•
Servicing shall only be performed as recommended by the manufacturer. Maintenance and repair requiring the
assistance of other skilled personnel shall be carried out under the supervision of the person competent in the use
of flammable refrigerants.
•
Please follow the instruction carefully to handle, install, clear and service the air conditioner to avoid any
damage or hazard. Flammable refrigerant R32 is used within this air conditioner. When maintaining or
disposing of the air conditioner the refrigerant must be recovered properly and should not be allowed to
discharge to the air directly.
•
No open fire or device like switch which may generate spark/arcing shall be around air conditioner to avoid
causing ignition of the flammable refrigerant used.
•
Please follow the instruction carefully to store or maintain the air conditioner to prevent mechanical damage from
occurring.
•
Flammable refrigerant R32 is used in air conditioner. Please follow the instruction carefully to avoid any hazard.
For specific information on the type of gas and the amount, please to the relevant label on the unit itself.
•
The appliance shall be stored in a room without continuously operating open flames (for example an operating
gas appliance) and ignition sources (for example an operating electric heater).
Transport of equipment containing flammable refrigerants:
Marking of equipment using signs:
Disposal of equipment using flammable refrigerants:
Storage of equipment / appliances:
instructions.
Storage of packed (unsold) equipment:
mechanical damage to the equipment inside the package will not cause a leak of the refrigerant charge. The
maximum number of pieces of equipment permitted to be stored together will be determined by local regulations.
See local regulations.
See national regulations.
The storage of equipment should be in accordance with the manufacturer's
Storage package protection should be constructed such that the
SAVE THESE INSTRUCTIONS!
See transport regulations.