Environmental Conditions - Micromega MYSPEAKER Manuel D'utilisation

Cleaning your speakers
1. Disconnect the mains cable from your MySPEAKER powered speaker.
2. Using a soft or slightly damp cloth, remove any dust or marks. Take care not to spill any
liquid inside the device. Warning: to avoid damage do not use any solvents or cleaning
products with a solvent base (acetone, trichloroethylene..) nor any abrasive products. We
recommend you spray any cleaning products onto your cloth and not directly onto your
MySPEAKER and then clean it.
3. Reconnect the mains supply.

Environmental conditions

Working temperature: 0° to 35° C (32° to 95° F)
Storage temperature: -25° to 60° C (-13° to 140° F)
Relative humidity (working): 20 % to 80 %
Humidity (storage): 10 % to 90 % (without condensation)
Avoid damp places
Keep your MySPEAKER powered speaker away from liquids such as drinks, sinks, baths,
shower cubicles etc. Protect your MySPEAKER from direct sunlight, rain or any other source
of damp. Take care to not spill food or liquid on your device. If this happens unplug your
speaker before cleaning. If too much liquid has spilt on your speaker we advise you to return
it to your authorised vendor. It is important not to connect it to a mains supply in this state.
GUARANTEE
Your MySPEAKER powered speaker is guaranteed for 1 year from the date of purchase. If
your speaker needs repairing you should take it back to your authorised vendor in its original
packaging along with a receipt for purchase. The guarantee covers manufacturing defects
with the exception of:
• Accidental damage, negligence or misuse
• Setting up the speaker in a way that is not in the manual
• Any repair carried out by a third party (unskilled worker)
• Damage in transit.
NOTICE MYSPEAKER BT140X140 FR-UK-GER.indd 17
17
30/04/15 07:14