Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
MySPEAKER powered speakers have an AN1 analogue line level audio input, a
24/96 USB digital input plus two SPDIF inputs, Optical and Coaxial 24/192. What
is more the MySPEAKER is equipped the latest Bluetooth aptX® module which
produces exceptional sound quality.
Speaker out: Cable connection terminal for connecting the active speaker to the
passive speaker.
AN1: analogue terminal for RCA plug
USB (type B ) : Entrée numérique pour la connexion d'un ordinateur
OPTO: optical digital input terminal with a Toslink plug, only compatible with PCM
signal
COAX: digital input terminal with an RCS plug, only compatible with a PCM signal
Sub: analogue output terminal for connecting a Subwoofer
USB ( type A ): this port is only for charging your devices (smartphone, tablet,
MP3 player)
Trig: 3.5mm mini-jack connection for external control
SET: use to set up your system with either OPTO or COAX and left and right
speakers
Mains plug and fuse: for connecting the mains cable and safety fuse (factory-
installed)
Voltage selector: two different positions, protected by a detachable cover plate
Operation
Once you have connected all of the cables you can plug your MySPEAKER into the
mains. The speakers are in "STANDBY" mode which is indicated by the red LED
light which is just behind the cone on the front of the speaker. Use the remote
control to work the speakers.
12
NOTICE MYSPEAKER BT140X140 FR-UK-GER.indd 12
30/04/15 07:14
Publicité
Table des Matières
