TIPTEL cyberBOX 100 Manuel D'utilisation page 10

.eng .
LEDs and sockets
1.
2.
3.
4.
5.
6.
Installation
For an optimal functioning of this tiptel cyberBOX 100 we recommend the
installation of the corresponding drivers. They must be installed before
connecting the device to the USB interface of your computer. The drivers can
be obtained from our homepage.
1. Proceed to www.tiptel.org and choose the requested country. The country-
specific tiptel homepage is opening. Click down left on "Skype" resp.
"VoIP" and then, under tiptel cyberBOX 100, on
2. Under "Download" please load the current USB driver for the device. Keep
this directory in mind.
3. Go to the directory and double-click on "TiptelSkypeManager.exe". Follow
the instructions on your PC.
USB-socket
CO-line socket ‚LINE'
Telephone extension socket ‚TEL'
LED ,LINE' (call uses PSTN line)
LED ‚USB' (call uses Skype®)
LED ‚POWER' (connected to USB port, PC is on)
1 2
-10-
3
4
5
6
.