Installation spacing
The following spacing dimensions are recommended for this
washer. This washer has been tested for installation with spacing
of 0" (0 cm) clearance on the sides, front, rear, and top.
Recommended spacing should be considered for the following
reasons:
The location must be large enough to allow the washer door
to be fully opened.
Additional spacing should be considered for ease of
installation and servicing.
Additional clearances might be required for wall, door, and
floor moldings.
Additional spacing of 1" (2.5 cm) on all sides of the washer is
recommended to reduce noise transfer.
Companion appliance spacing should also be considered.
Washer Dimensions
57"
(144.8 cm)
27"
(68.6 cm)
*Includes the door handle.
**Includes the feet extended 1" (2.5 cm).
The optional decorative mat (included)
will add approximately ¹⁄₂" (1.3 cm).
NOTE: Door is not reversible.
Recommended installation spacing for custom
undercounter installation, washer only
The dimensions shown are for a washer without the optional
decorative mat placed on top.
1" (2.5 cm)
42" min.
(106.7 cm)
1"
(2.5 cm)
42"
(106.7 cm)**
33" (83.8 cm)*
1"
27"
(68.6 cm)
(2.5 cm)
Recommended installation spacing for recessed or
closet installation, with or without a pedestal
For closet installation with a door, minimum ventilation
openings in the top and bottom of the door are required.
Louvered doors with equivalent openings are acceptable.
1"
27"
1"
1"
(2.5 cm)
(68.6 cm)
(2.5 cm)
(2.5 cm)
A
A. Recessed area
B. Side view - closet or confined area
C. Closet door with vents
*Required spacing
Recommended installation spacing for cabinet
installation, with or without a pedestal
For cabinet installation, with a door, the minimum ventilation
openings in the top are required.
1"
27"
1"
1"
(2,5 cm)
(68,6 cm)
(2,5 cm)
(2,5 cm)
(83,8 cm)
A
A.Front view
B. Side view
C. Cabinet with vents
*Required spacing
2
48 in.
2
(310 cm
)*
2
24 in.
2
(155 cm
)*
33"
4"
(83.8 cm)
(10.2 cm)
C
B
7" (17,8 cm)*
7" (17,8 cm)*
4"
33"
(10,2 cm)
B
C
3"
(7.6 cm)
3"
(7.6 cm)
5