Functions - Astralpool REDOX BASIC EV NEXT Manuel D'installation

Functions

:
CALIBRATION

Press

Sequence Standard calibration buffer solution Redox 465mV
SET POINT

Press:

hold down


Press
PROGRAM
Press to set the following Item:


SETPOINT 750mV
 Select with the button
 It's possible to adjust from 0 to 1000 mV for Redox.
SETPOINT TYPE HIGHT
 Select with the button
 It's possible to adjust dosing and High or Low
OFA TIME OFF
 Select with the button
 It's possible to adjust OFA time in minutes
CALIBRATION 465mV
 Select with the button
 It's possible to select 465 mV for the redox function or disabled.
Code 0000137992
INSTRUCTION SETTING
for 3 Seconds
and change the value with key
750mV
(together) for 5 Seconds and run Program Setup
Language

With the button
Flow

Select with the button
 It's possible to enable(ON) or disable (OFF) signal input flow (high voltage)
connected in parallel to the recirculation pump.
and set with
and set with
and set with
and set with
It's possible to have 5 language EN, IT, ES, DE, FR
Rev 1.0 2