Setting The Clock - Artsound U3 Mode D'emploi

Setting the clock

. Clock can be set either the radio is power on or off.
2. Display will show "- : - -" when the batteries are installed or when
the radio is connected to the mains supply.
3. Press in Tuning control (Time Set) knob for more than 2 seconds,
display will flash time set symbol
followed by a beep.
4. Rotary Tuning Control (Time Set) knob to set the required hours.
5. Press in Tuning control knob, the minute digits will flash.
6. Rotary Tuning Control button to set required minute.
7. Press in Tuning Control button to complete time setting.
and also the hour digits,
GB
8