Denon Professional DN-200AZB Guide D'utilisation page 6

Troubleshooting
If you encounter a problem, try doing these things first:
•
Make sure all cables and other connected devices are properly and securely connected.
•
Make sure you are using DN-200AZB as described in this User Guide.
•
Make sure your other devices or media are working properly.
•
If you believe DN-200AZB is not working properly, check the following table for your
problem and solution.
Problem:
Power does not turn on.
DN-200AZB does not
produce any sound, or
the sound is distorted.
Audio from my Bluetooth
device does not play
through DN-200AZB.
Pairing my Bluetooth
device to DN-200AZB
requires a PIN.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20 cm between the radiator and your body.
6
Solution:
Make sure DN-200AZB's power input
is properly connected to a power outlet
using the included power adapter.
Make sure all cable and device
connections are secure and correct.
Make sure none of the cables are
damaged.
Make sure the settings on your
Bluetooth device, loudspeaker, mixer,
etc. are correct.
Make sure you have properly paired
your Bluetooth device.
Improve the Bluetooth signal reception
by moving your Bluetooth device
closer to DN-200AZB. Also, remove
obstacles (walls, furniture, etc.) so
there is a clear line of sight between
your Bluetooth device and DN-
200AZB.
To check for short circuits, check the
line from DN-200AZB's output to the
input of your loudspeaker. If this line is
still good, check your loudspeaker's
internal connections and components.
Short circuits are often due to bad
cables or speaker components—rarely
due to the amplifier itself.
Enter 0000 as the PIN. (Some older
Bluetooth devices may require you to
enter a PIN.)
Please see:
Setup
Setup
Setup and Operation
Operation