Connection Diagram - Denon Professional DN-200AZB Guide D'utilisation

Setup
Items not listed under
Warnings:
Do not make any connections when any device is powered on.
Do not allow the wires from terminals to come in contact with each other.
Do not connect either positive output to chassis ground.
1. Use standard speaker wire (up to 16 AWG) to connect your loudspeakers to the included
4-pin Euroblock connector. Insert that Euroblock connector into DN-200AZB's output.
2. Optional: Use standard speaker wire (up to 16 AWG) to connect an external receiver or
amplifier to the included 3-pin Euroblock connector. Insert that Euroblock connector into
DN-200AZB's input.
3. Use the included power adapter to connect DN-200AZB's power input to your power
source.
Important: Do not use DN-200AZB near a microwave oven, which can interfere with the
Bluetooth signal reception.
4. Make sure all of your connections are secure, and power on your receiver first (if you are
using one) and any devices connected to it.
5. Press DN-200AZB's power button to power it on.

Connection Diagram

SOURCE SELECT
ZONE 2 ZONE 2 ZONE 3 ZONE 3
ON/OFF SOURCE ON/OFF SOURCE STATUS
PHONES
AUX 1
HDMI 7 5V/1A
Power
4
Introduction > Box Contents
Receiver
MASTER VOLUME
QUICK SELECT
INFO OPTION
DIMMER 1 CBL/SAT 2 Blu-ray 3 GAME 4 NETWORK
ENTER
VIDEO L - AUDIO - R SETUP MIC
BACK SETUP
AUX 1
IN-Command
S
INTEGRATED NETWORK AV RECEIVER
are sold separately.
E R I E S
AVR-X4000
Bluetooth device
(smartphone, tablet,
computer, etc.)
Bluetooth Antenna
Loudspeaker