Auto Preset; Manual Preset; Energy Saving - LENCO SCD-331 Manuel D'utilisation

Radio portable, lecteur cd/mp3 avec usb et bluetooth

Masquer les pouces Voir aussi pour SCD-331:

Table des Matières

Les langues disponibles

FM RADIO

1. Select the FM Radio mode.

2. Press the "TUNE +/-" button to select the desired station.

*FM Stereo indicator on = Stereo broadcast program is received

If the stereo reception of your favorite station is not ok you can press the FM ST (6) button to

manually switch between Stereo (ST) or Mono (NO) music play. In Mono mode the reception

can be improved for that channel.

AUTO PRESET

1. Press and Hold the "PLAY/PAUSE" button to do full "Auto Scan". Channels with good

reception will be stored as preset.

2. Press the "PRESET" or "SKIP+/- " button to choose the preset station

1. Press the "TUNE +/-" button to select the desired station.

2. Press the "PROG" button to be manual preset mode

3. Press the "P +/-" button to select the desired station

4. Press the "PROG" button to confirm

5. Press the "P +/- " button to choose the preset station

AUX

1. Select the Aux mode.

2. Use a 3.5mm Jack cable(not included) to connect an external audio player to the Line in

port on the back of the SCD-331

3. Change the volume level on this device and External Music Device separately

To comply with the energy saving requirement this device will automatically switch to

standby mode when no music has been playing for 10 minutes.

Table des Matières