SOLAC Q605 Mode D'emploi page 13

tive collection of Waste from Electric
and Electronic Equipment (WEEE).
- This symbol means that prod-
uct may include a battery or
batteries; user must to remove them
before disposing of the product. Re-
member that batteries must be dis-
posed of in duly authorised contain-
ers. Do not dispose of them in fire.
HOW TO REMOVE THE BATTER-
IES FROM THE INTERIOR OF THE
DEVICE:
CAUTION: It is important that the
•
batteries are fully discharged prior
to its withdrawal from the appara-
tus.
To remove the batteries, once the
•
life of the appliance, proceed as
follows:
Open the top shell of the appara-
•
tus, removing previously with the
help of a screwdriver fixing screws.
Identify the battery wires and cut
•
their (Red and Black). To avoid
risks of a short circuit with a pos-
sible residual battery load, first cut
the Red wire and protect it by using
insulating tape, then proceed to cut
the Black wire proceeding in the
same way.
Safely remove the battery from its
•
housing.
This appliance complies with Direc-
tive 2014/35/EU on Low Voltage,
Directive 2014/30/EU on Electro-
magnetic Compatibility,
2011/65/EU on the restrictions of
the use of certain hazardous sub-
stances in electrical and electronic
equipment and Directive 2009/125/
EC on the ecodesign requirements
for energy-related products.
EN
Directive