SOLAC Q605 Mode D'emploi page 12

For sticking lint, move on the
•
clothes perpendicularly and paral-
lel until is removed.
On thin texture clothes, pile them
•
up into two layers and shave them
gently.
On clothes with protrudes or ap-
•
plications, avoid contact with the
applications or protrudes.
On clothes with patterns, move the
•
appliance in the direction of the
pattern for better results.
Once you have finished using the
•
appliance:
Stop the appliance using the on/off
•
button.
Remove the fluff container and
•
empty it accordingly. (Fig.5).
Clean the appliance.
•
CLEANING
Disassemble the appliance in ac-
•
cordance with the following steps:
Take off the remover circle. (Fig.1).
•
Remove the outer foil as arrow di-
•
rection. (Fig.2).
Take out the rotative blades and
•
clean the blades shaft with the
brush. (Fig.3).
Clean the container (Fig.5).
•
everselly install the blades and out-
•
er foil into the appliance. (Fig.4).
Mount the appliance (Fig.6).
•
Clean the equipment with a damp
•
cloth with a few drops of wash-
ing-up liquid and then dry.
Do not use solvents, or products
•
with an acid or base pH such as
bleach, or abrasive products, for
cleaning the appliance.
ot include if appliance doesn't have
•
connection to the mains:
Never submerge the appliance in
•
water or any other liquid or place it
under running water.
ANOMALIES AND REPAIR
Take the appliance to an author-
•
ised technical support service if
product is damaged or other prob-
lems arise. Do not attempt to dis-
assemble or repair the appliance
yourself as this may be dangerous.
FOR EU PRODUCT VERSIONS
AND/OR IN CASE THAT IT IS RE-
QUESTED IN YOUR COUNTRY:
ECOLOGY AND RECYCLABILITY
OF THE PRODUCT
The materials of which the packag-
•
ing of this appliance consists are
included in a collection, classifica-
tion and recycling system. Should
you wish to dispose of them, use
the appropriate public recycling
bins for each type of material.
The product does not contain
•
concentrations of substances that
could be considered harmful to the
environment.
- This symbol means that in
case you wish to dispose of
the product once its working
life has ended, take it to an au-
thorised waste agent for the selec-
EN