Front Panel Operation - Alesis TransActive 50 Guide D'installation Rapide

Input Section (knobs #1 through #4):
These knobs let you set the input gain and effects send levels of your TransActive 50.
1. Channel 1 / Mic Volume – Raise or lower the volume for channel 1.
2. Channel 1 / Mic Effect – Determines how much of your channel 1 input is sent
to the TransActive50's internal effects processor.
3. Channel 2 Volume – Raise or lower the volume for channel 2.
4. Channel 2 Effect – Determines how much of your channel 2 input is sent to the
TransActive50's internal effects processor.
Master Section (knobs #5 through #9):
These knobs let you apply EQ to your signal, select the digital effect you'd like to hear,
and set your output level.
5. Bass – Boost or cut bass levels by +/- 10 dB.
6. Mid – Boost or cut the midrange by +/- 10 dB.
7. Treble – Boost or cut treble levels by +/- 10 dB.
8. Effect Selector – Selects one of the 15 effects available in the TransActive's
internal effects processor. Set this knob to "off" if you'd like to bypass the effects
processor. For more information about the effects, see the section entitled "The
TransActive's internal effects."
9. Master Volume – Sets the main output level of the speaker.
2

Front panel operation