Optional Frontal Pellet Feeding Kit - LA NORDICA COMFORT IDRO L80 Manuel D'instruction

OPTIONAL FRONTAL PELLET FEEDING KIT

The optional frontal pellet feeding kit allows feeding pellets inside the tank without
having to remove the insert (which requires the shutdown of the machine).
Before proceeding with the installation you must ensure that the structure that will cover the insert ensures a hole with the
minimum dimensions shown in the figure below.
The images shows the minimum sizes to be observed between the insert and the cover: these sizes are necessary to enable the
correct movement of the frame and the removal of the same from its original place.
You can also assemble it with the insert fitted.
COMFORT L80 - IDRO 800
700 X 800 MM WITH OPTIONAL TRAY
L= 800
ATTENTION:
FOLLOW THE INSTRUCTIONS ALWAYS IN COMPLETE SAFETY!
THE STOVE MUST BE COMPLETELY COLD, SWITCHED OFF
AND UNPLUGGED FROM THE POWER OUTLET.
TO ENSURE THE PROPER OPERATION OF THE INSERT, THE TRAY MUST ALWAYS REMAIN CLOSED
EXCEPT DURING THE RESERVOIRE LOADING PHASE.
ENGLISH 13