Windows Power Management; Restarting The System; Power Off - Fujitsu LIFEBOOK UH572 Ultrabook Guide D'utilisation

Enable or Disable the Hibernation Feature
The default settings are not enabled. To enable or disable the Hibernation feature follow these steps:
From the Start menu, select Control Panel (icon View), then select Power Options.
1
Select "Choose what the power button does" or "Choose what closing the lid does", then make your selections (Do
2
Nothing, Sleep, Hibernate, or Shut Down).

Windows Power Management

The Power Options icon located in the Windows Control Panel allows you to configure some of the power
management settings. For example, you can use the Power Options to set the timeout values for turning off the
display and hard disks whether you are running the LIFEBOOK on battery power or one of the adapters.

Restarting the System

If your system is on and you need to restart it, be sure that you use the following procedure.
Click the Start button, and then move the mouse over the small arrow at the bottom right of the window.
1
Select Restart from the list.
2
T
URNING OFF YOUR
SHUT OFF MAY CAUSE AN ERROR WHEN YOU START THE NEXT TIME

Power Off

Before turning off the power, check that the hard drive/optical drive access indicator is off. If you turn off the power
while accessing a disk there is a risk of data loss. To ensure that your LIFEBOOK shuts down without error, use the
Windows shut down procedure.
LIFEBOOK U
LTRABOOK WITHOUT EXITING
38 - Power Management
W
INDOWS OR TURNING ON YOUR SYSTEM WITHIN
.
10
SECONDS OF THE SYSTEM BEING