Troubleshooting The Wlan; Troubleshooting Table - Fujitsu LIFEBOOK UH572 Ultrabook Guide D'utilisation

Troubleshooting the WLAN

Troubleshooting Table

Causes and countermeasures for troubles you may encounter while using your wireless LAN are described in the
following table.
Problem Possible Cause
Unavailable Incorrect network name
network (SSID) or network key
connection
Weak received signal
strength and/or link
quality
The WLAN device has been
deactivated or disabled
The computer to be
connected is turned off
RF interference from
Access Points or other
wireless networks
Possible Solution
Ad hoc connection: verify that the network names (SSID's) and network keys (WEP)
of all computers to be connected have been configured correctly. SSID's and WEP key
values must be identical on each machine.
Access Point (Infrastructure) connection: set the network name (SSID) and network
key to the same values as those of the access point.
Set the Network Authentication value identically to that of the Access Point. Please
consult your network administrator for this value, if necessary.
Ad hoc connection: Retry connection after shortening the distance to the destination
computer or removing any obstacles for better sight.
Access Point (Infrastructure) connection: Retry connection after shortening the
distance to the access point or removing any obstacles for better sight.
Check if the wireless device is turned ON. Also verify "Disable Radio" is not checked in
"Network setting" window.
Check if the computer to be connected is turned ON.
The use of identical or overlapping RF channels can cause interference with the
operation of the WLAN device. Change the channel of your Access Point to a channel
that does not overlap with the interfering device.
99 - Troubleshooting the WLAN