Ruby AROMA 3.5 Mode D'emploi page 28

2. Operation steps
1) Get the water tank out of the machine, unscrew the water tank cover and fill the tank with
water, then screw back the water tank cover tightly . Put the water tank on the machine base
steadily.
2) Inspect whether the mist outlet nozzle is put well on the water tank.
3) Plug in the power, turn the knob clock wisely ., machine starts to work. To adjust the mist
output from minimum to maximum by turning the knob clock wisely. To adjust the mist output
from maximum to minimum and to turn off the machine by turning the knob counter clock
wisely.
4) When out of water, the indicating light turns red and the machine stops working .Refill the tank
then turn on the machine to have machine work again.
5) During the machine working, machine will stop working when take off the tank; put the water
tank to the machine base, machine will continue to work.
VI. Cleanness & Maintenance
Before cleaning, turn the functional knob point to " OFF", take off the plug
1. Transducer
The water quality in someplace is too hard so that the transducer surface will be easy to scale
formation, The users need to clean transducer with cleaning agent .
Add little cleaning agent on the transducer surface (More or less depends on the scale ), then
infuse water into the sink to soak the sink fully for 10-15 min.
Clean with brush until scale disappear. Clean twice with water
 Don't clean transducer by any metal or stiffness material or scrape it to avoid any damage
2. Water tank inside
Clean water tank inside and water sink twice per week at least when use machine frequently
Use soft cloth wipe it when water tank side has scale
There will be some dirt stick to the tank inside wall, which can be cleaned with soft scour,
clear the scour completely
Don't put acid, alkalescency, blencher scour into water tank to avoid damage
3. Water sink inside
Take out the water in sink, Clean the scale by brush, then wiped by damp cloth
Flush it by water
Don't pour water in sink directly when cleaning the water sink inside
Don't use acid scour to wash the water sink inside to avoid damage on transducer
4. Body and water tank outside
Wipe it with soft cloth, use soft scour when any dirty
5. Storage
Drain out water in tank and body, clean the dirt, wipe out water and airing the machine
Ensure that no water in the machine and put it to the carton
Storage the package in dry place
AROMA 3.5
28