Receiving Preset Stations; Usb/Aux; Playing Back - Pioneer MVH-330DAB: MVH-130DAB Mode D'emploi

3
Press the M.C. dial.
The unit begins to search for a station. When it is found, its program service name is
displayed.
NOTES
• To cancel the search, press BAND/DIMMER/
• The program of some stations may differ from that indicated by the transmitted PTY.
• If no station is broadcasting the type of program you searched for, [NOT FND] is displayed for about
two seconds and then the tuner returns to the original station.

Receiving preset stations

1
Press SRC/OFF to select [RADIO].
2
Press BAND/DIMMER
3
Press a number button (1/
TIP
The / buttons can be also used to select a preset station when [SEEK] is set to [PCH] in the
FUNCTION settings (page 17).

USB/AUX

Playing back

Disconnect headphones from the device before connecting it to the unit.
USB devices (including Android™)
1
Open the USB port cover.
2
Plug in the USB device using an appropriate cable.
NOTE
To automatically switch to [USB] source when a USB device is connected to the unit, set [USB A] to [ON]
in the SYSTEM settings (page 18).
CAUTION
Use a USB cable (sold separately) to connect the USB device as any device connected directly to the
unit will protrude out from the unit, which could be dangerous.
Before removing the device, stop playback.
.
to select the band from [F1], [F2], [F3] or [AM].
to 6/ ).
- 9 - - 9 -