Hkoenig TOS32 Manuel D'utilisation page 8

Carefully remove your toaster from its box. Remove all packaging from inside the
toasting slots. Position your toaster on a stable, secure, dry and level work surface
away from the edge. Connect the plug to a suitable power outlet and make sure that
the power cord does not overhang the work surface.
When you first use your toaster, there may be a slight odour as the heating elements
warm up for the first time. This is normal and not a cause for concern. To remove the
odour, simply operate your toaster for the first time without any bread in it.
CONTROLS
Browning control
The browning control regulates how much the bread is toasted—in other words, the
colour of the toast. Lower settings produce lighter toast and higher settings produce
darker toast. When setting the browning control, remember that dry or thin slices of
bread will toast quicker and require a lower setting. Moist or thick slices of bread will
require a higher setting.
Cancel button
The toasting process can be stopped at any time by pressing the cancel button.
High lift feature
The high lift feature uses the loading handle to help you to remove the toast. When
toasting has finished, simply lift the loading handle upwards from its rest position to
raise the toast and make it easier to remove.
Frozen bread function
The frozen bread function allows you to toast bread straight from the freezer. Insert
the bread into your toaster, press the loading handle down and then press the frozen
bread button. Your toaster will extend the toasting time to allow the bread time to
defrost. Watch the toast to ensure that it doesn't burn.
Re-Heating Toast - Reheat button
Reheat toast without additional toasting on this setting.
1. Place toast into toasting slots.
2. Push down the pop-up lever until it clicks into place and press the 'Reheat'
button. lt will illuminate blue along with the 'Stop' button.
3. When the toast is reheated, the pop-up lever will lift the toast automatically and
both lights will go out.
USING YOUR TOASTER
1. Set the level of toasting using the browning control. The higher the number
selected, the darker the toast will be.
2. Place the bread into the toasting slots. Press the loading handle down until it
latches. The bread will be lowered into the toaster and toasting will begin. The
loading handle will not latch if your toaster is not connected to the mains
supply.