Télécharger Imprimer la page

Schlage BE467F Instructions D'installation page 2

Masquer les pouces Voir aussi pour BE467F:

Publicité

Warnings and Cautions
Warnings indicate potentially hazardous conditions, which if not
avoided or corrected, may cause death or serious injury.
Cautions indicate potentially hazardous conditions, which if
not avoided or corrected, may cause minor or moderate injury.
Cautions may also warn against unsafe practices.
Caution: Cautions indicate a condition that may cause equipment
or property damage only.
2
WARNING
CAUTION
Prepare for Installation
Tools Needed
Phillips screwdriver
Tape measure
Important Notes
Install and test lock with door open to avoid being locked in or out!
Caution: Use provided bolt!
DO NOT use a power drill for installation!
Check door dimensions.
See consumer.schlage.com/Service-Support for door preparation
instructions if dimensions are different.
Crossbore
Diameter
2Z\," (53 mm)
Optional Tools
Flathead screwdriver
Torx
driver
TM
WARNING
Backset
2C\," OR 2C\v"
(60 mm OR 70 mm)
1" (25 mm)
Hole
Minimum 4"
(102 mm)
Door Thickness
1C\," to 1C\v"

Publicité

loading