Publicité
6.1
OPERATOR PRESENCE CONTROL - MECHANICAL (OPC)__________________
The OPC control is on the right-side handle bar. To
operate, press the button [B) and pull the lever [A] to
engage the drive. To disengage the OPC, release lever
[A]. Button [B] will spring into position and prevent the
operation of Lever [A]. Forward drive will stop.
6.2
LANDROLL CLUTCH _________________________________________________
This control is on the left-side of the handle bar. To oper-
ate, pull the lever [C] the clutch is disengaged. When the
landroll clutch is disengaged, the machine can be moved
manually.
6.3
THROTTLE CONTROL ________________________________________________
To change the cutting speed, use the hand lever [E].To
increase the engine turns, move the hand lever [E] down.
To decrease the engine turns, return the hand lever [E] to
the Low Idle
position.
6 CONTROLS
D
C
E
B
A
en-31
Publicité
