Publicité
All manuals and user guides at all-guides.com
BLOCK
12
IN MEMORY OF
ADIL WILSON
LINK: Use a stereo cable to link two BLOCK 12 units to
create a left and right stereo system. The Link connection
is designed to work with another BLOCK 12 only.
LINK PAN: Use the LINK PAN control to adjust signals being
sent to LINKED BLOCK 12s.
BALANCE: The LINK PAN control also functions as a balance
control for the Headphones.
Traynor Block 10 & Block 12
Block 10 - 200w, 10 inch / 2.5 inch
Block 12 - 200w, 12 inch / 2.5 inch
Today, keyboard players, acoustic guitarists, and other musicians need the ability to travel
light. More importantly they require amplification that maintains the highest standards of fidel-
ity, versatility and reliability. The Traynor Block Series answers those requirements and more.
The Block series is a linear mixing and amplification system built into a versatile combo-style
enclosure. What this means to the pro user is that you can take your Block 10 or 12 anywhere and
do a number of things a PA system would permit. While the Block 10 or 12 are not meant to re-
place a full PA-system, they can be used as one. With the Block 10 or 12 used as a micro PA, the
system fits in a subcompact car with room left for a keyboard, a mic, a stand, a guitar and more.
Traynor's legendary reliability is a good base on which to build anything. The Block series
offers four inputs; one which accepts a mono or stereo keyboard output, one which accepts
a dynamic microphone or acoustic-electric guitar, one which accepts any line-level signal,
perhaps from a PA mixer, and another which accepts a CD player or other stereo program
source – even a DSP outboard guitar preamp like a *Pod®.
Fully connected, your Block unit can
• Quality component selection including the use of high-grade glass epoxy circuit boards
and low noise components.
• Four input channels utilizing an microphone compatible XLR, ¼-inch TRS phone jacks
and1/8-inch (3.5 mm) jacks.
• 2-band EQ on both Channel 1 and Channel 2 .
• 2-way speaker system features a 200-watt 10-inch low frequency driver (12-inch on
Block 12) and a 2.5-inch 20-watt high frequency driver .
• Blend up to four audio sources into a single mono mix-down.
• Professional Line Out using XLR jack with switchable pre/post-EQ and ground lift
options. Feed your mixed, mono signal to a house PA or recording desk – fully
balanced.
• Help you record, or practice silently with headphones (in stereo, if the input is stereo).
• Supply a stereo Link signal to another Block unit if you want stereo sound onstage.
• Be set up anywhere. The Block 10 and 12 have speaker stands built-in while also
being able to fit neatly under a keyboard stand or can face you onstage as a monitor.
• Provide clear, accurate performance for years to come.
*Covered by our famous 2 year unlimited* "Even if you break it" warranty
Left BLOCK 12 Amp
Right BLOCK 12 Amp
1
TYPE: YS1115
A-Z1615BR/1v0
Power
On
DESIGNED & MANUFACTURED BY
YORKVILLE SOUND • TORONTO, CANADA
Off
Publicité
