3 Functioning
6. Press the "Repetir sec"(Repeat sequence) icon to record the program.
The computer will ask how many times you want to repeat the program.
PLEASE NOTE
At this point you can either continue programming or save it.
7. Press the "Fin prog." (End prog.) icon.
Once the program has been saved it can be selected and used at any
time.
PLEASE NOTE
If the shower door opens or the "stop" icon is pressed while the user is
programming, the shower will stop and the user can resume, save or
cancel the program.
If the user tries to carry out an operation without selecting a jet, a
notification will appear on the screen and the system will wait until a jet
has been chosen.
After a power cut, the system recovers all the data and none of the
user's programs will be lost.
3.6.1 Change the name of a programmed massage
1. Press the programmed massage icon of which you want to change the
name on the main screen (see fig.1).
2. Press the "Opciones" (Options) icon (see fig.7).
3. Press the "Cambiar nombre" (Change name) icon (see fig.8).
The "Cambiar nombre" (Change name) screen appears (see fig.10).
22/36
User manual–Wellma Showers