Publicité
All manuals and user guides at all-guides.com
6.1 Filling with the Seagow compressor
For this part, please refer to the Seagow Compressor user manual, supplied
with the latter
6.2 Filling with a classic dive compressor
• The handling of a classic dive compressor must be performed by a
qualified person
• When the first stage is separated from the valve, protect it thanks to the
supplied protection
• During the reassembling of the first stage regulator, make sure that the
outputs are well-oriented
WARNINGS
• This handling of a classic dive compressor has to be done by a
qualified person
• The outlet air flow rate of the compressor has to be slowed down
compared to the filling of a scuba tank called « usual » of several
litters
• The filling must be done very slowly, from 0 to 200 bar (3000 PSI) in 2
mins 30 secs minimum
• The filling must be done very slowly, from 0 to 300 bar (4500 PSI) in 3
mins minimum
• Make a break during the filling in case of a too important heating and
let the tank cool
7.
Dangers
• The non-respect of these elementary rules of scuba diving may engender
risks of drowning or physical damages which can cause death
• In case of shock, the equipment can be damaged without visual harms, in
case of doubt, make your equipment inspected by a specialist
• It is totally forbidden to change the layout or to modify the different parts of
the Seagow
• Never integrate elements from the Seagow on an other (diving) equipment
or vice versa
• Never introduce water in the equipment
Publicité
