All manuals and user guides at all-guides.com
8.
Storage
• After the drying, store the products in a box or a clean and closed bag
• Store the products in a dry place, protected from the light, between +5°C
and 35°C (41°F to 35 °F)
• Let the valve closed during storage, the top compartment should not be
under pressure
• Do not store the products near gasolines, oils or other chemical products
• Do not store the products in a dusty place or where there is sand
• The flexible should be free from all constraints, tank should be in a vertical
position, valve to the top
During storage, remove the first stage regulator from valve
•
protect the output with the cap included
9.
Maintenance and upkeep
• The proper functioning and the proper preservation of your equipment do
not necessarily depend on its use frequency. Even when it is not used, a
bad storage can significantly damage the device
• Make your Seagow regularly inspected by a specialist, an annual
inspection is recommended
• The French law doesn't impose inspection for the Seagow 200, bu the
inspection is mandatory for the Seagow 300. Even if it is not mandatory,
we but recommended inspection for the Seagow 200 (inquire by
country)
• The French law do not impose inspection or obligatory re-test for the
pressure regulator but it is advisable (inquire by country)
• Prefer the replacement of a defective piece by an original one
• If there is a leak in the 1
the DIN connection with an Allen key
• Do not try to fix your equipment by yourself else-way than by the
instructions given in this manual
• Do not forget that your security and the proper functioning of your
equipment depend on its maintenance
• For the upkeep of your regulators and your tank, consult a diving center
10. Warranty
• The equipment is guaranteed for one year starting from the date of
purchase of the products
st
stage, tighten the MP output with your hand and
and