Publicité
container. Put lid with scoop on mixing container, and run the appliance through
a complete cycle on "HEAT & HI SPEED." After cycle, empty mixing container
through the dispensing valve and let air dry.
Stopper Pin and Rubber Stopper
To disassemble the valve for cleaning:
1.
Remove the valve from the container by unscrewing the entire valve body
counter-clockwise.
2.
Remove the cap by unscrewing it counter-clockwise.
3.
Remove the stopper/stopper pin, spring, cap, and lever from the valve body.
Note: The stopper and stopper pin are tightly fit and need not be separated.
4.
Compress the cap and stopper together to remove the lever and cap.
5.
Clean all parts and reassemble in the order shown.
All manuals and user guides at all-guides.com
Cleaning the Dispensing Valve
Cap
Spring
7
Lever
Valve Body
Publicité
