Regular Maintenance - Numatic James JVP 180 Mode D'emploi

● Keep your machine clean.
● Keep filters clean.
● Use filter bags, they will enhance performance and help keep machine clean.
● Use a Numatic Original filter bag under fine dust conditions.
● Keep hoses and tubes clear.
● Replace any worn or damaged parts immediately.
● Regularly examine the power cord. If damage is found such as cracking or ageing the power
cord must be replaced by a qualified person using the correct Numatic original part.
● Change dust bag frequently.
● Keep diffuser filter (where fitted) clean.
● Only use the brushes provided with the machine. The use of other brushes may impair safety.
● Unreel the cable with one pull or pull on the cable to unplug the machine from the power supply.
● Use to suck up hot ashes, lighted cigarette ends or flammable gases.
● Use steam cleaners, pressure washers or immerse in water to clean the machine.
● Attempt machine maintenance or cleaning unless the power supply plug has been removed
from the supply outlet.
● Use in a wet environment or to collect wet materials.
● Store your machine in wet conditions.
Data
Size Range
180
Keep the machine clean, including hoses and tubes.
Check for worn or damaged parts and replace immediately.
Do not steam clean or pressure wash.
Motor
800W
500W
Capacity
8L
Cleaning
Range
26.8 m

Regular Maintenance

Ensure the bag and filter are fitted.
Check the dust bag frequently.
Check filters are clean.
Regularly examine power cord.
Airflow
30 l/sec
Size
340x340x340 mm
Sound Pressure
67.1dB(A) - 61.2dB(A)
(IEC 60704-2-1)
Uncertainty 0.2 dB
Suction
2000mm w.g.
1300mm w.g.
Weight
5.5Kg
Protection Class
Class II